CubeMars GL60 KV25

The GL60 KV25 is a brushless gimbal motor from the CubeMars GL series, designed for gimbals, radar scanning heads and autonomous driving platforms. It works with 24 V systems and delivers 1.75 Nm peak torque from 230 g. Its wide 20 mm center hole allows internal wiring or slip ring integration.

Key features

• 20 mm hollow shaft. Signal and power cables pass through the wide center hole, or a slip ring fits inside. The system layout gets simpler and continuous rotation becomes possible.
• Smooth output at low speed. The optimized electromagnetic structure reduces torque ripple at low speed for more stable control.
• High torque density. It delivers 1.75 Nm peak torque from 230 g, a torque to weight ratio of 7.61 Nm/kg.
• Low no-load noise. Low cogging torque and quiet operation suit long observation tasks.
• IP45 protection. Resistant to dust and water splashes, it can work outdoors and in industrial settings.

Applications

Besides camera gimbals, typical applications include vehicle-mounted sensing units, rotary modules, radar scanning heads and other rotating mechanisms that need high torque at low speed.

Is it enough for your project?

The GL60 KV25 delivers 0.6 Nm rated and 1.75 Nm peak torque. In a gimbal, the required torque depends on how far the load's center of gravity sits from the rotation axis. For example, a 2 kg camera or sensor with its center of gravity 2.5 cm off the axis needs about 0.49 Nm of static torque (2 × 9.81 × 0.025). That load stays within the motor's rated torque.

It runs on 24 V, with a no-load speed of 516 rpm and a rated speed of 310 rpm. Rated current is 1.35 A and peak current is 4 A. For heavier loads, the GL80 KV30 may be a better fit.

How it compares to similar models

• GL60II KV28. It gives the same 0.6 Nm rated torque at 16 V, with a peak of 1 Nm. It weighs 276 g and is taller at Ø70.5 × 33.6 mm.
• GL40 KV70. At 16 V it gives 0.25 Nm rated and 0.5 Nm peak torque. It is lighter at 107 g and has an 8 mm center hole.
• GL80 KV30. At 24 V it gives 1 Nm rated and 2.9 Nm peak torque. It weighs 315 g, measures Ø87 × 22.3 mm and has a 30 mm center hole.

Frequently asked questions

Is the driver included?

No. The GL60 is the motor only, and the gimbal controller or FOC driver is chosen separately.

Does it have an encoder?

This product is the motor without an encoder. The manufacturer also offers an encoder option for the GL60. According to the manufacturer, the motor enables high-precision control when paired with an encoder.

Can a slip ring be fitted?

Yes. The 20 mm center hole is designed for slip ring integration, so cables do not wind up during continuous rotation.

In the box

• GL60 KV25 gimbal motor
• 150 mm connection cable

Box size 160 x 122 x 42 mm.

Related products

Our team can help you choose a gimbal controller, an encoder and the mounting design.

Products in stock are dispatched within 3 business days from our warehouse in Turkey.

Shipping cost and delivery time to your country are shown at checkout. For models not listed in stock, ask our technical team about the lead time.

To start a return, contact us through our technical team. The product must be unused, undamaged and in its original packaging.

Return conditions for international shipments are confirmed before purchase.